Jan 162010
 

NaviHawk_Watch Instructions

Set the digital time first then set the analog time.

  1. Start by making sure the mode hand is pointing at the TME indicator. Press the lower left button to achieve this.
  2. Press and hold the upper left button for 3 seconds. This will move the hour and minute hands to the 12 o’clock position so you can see what you are doing.
  3. Press the upper left or lower right buttons to find your city and then press the upper left button to reset the hour and minute hands to their previous positions.
  4. When you have the city you want pull the bottom left button out 1 click. The time should start flashing.
  5. Press the upper right button and you should see the seconds flashing. Press the lower left button to reset the seconds to 00.
  6. Press the upper right button and you should see the minutes flashing. Press the lower left button to set the minutes to the current time.
  7. Press the upper right button and you should see the minutes flashing. Press the lower left button to set the hour to the current time.
  8. Press the upper right button and you should see either 12H or 24H. Press the lower left button to switch between the two.
  9. Push the lower right button back in.
  10. The time should be set.

 

http://www.citizenwatch.com/us/technical/settings/index.html#